|
|
Post by Tim Glubaskas on Aug 21, 2012 7:30:53 GMT -9
|
|
|
|
Post by brianborton on Jan 18, 2018 15:49:11 GMT -9
Have you complied with SB1289a and its corresponding AD. 2017-10-20.
Using stripper bothers us considering the area and the adjacent components and cables.
Has anyone developed an AMOC fir this
|
|
|
|
Post by Tim Glubaskas on Jan 19, 2018 12:33:46 GMT -9
Afternoon, Brian -
We just finished our 15th one of these and it wasn't too bad.
The areas you strip are fairly small so it wasn't really an issue for us to strip.
One 'triangle' had some wiring going through, but we just removed it prior to doing the work.
If you have any questions feel free to drop us a line
dm@warbelows.com
Regards!
tim
|
|
|
|
Post by klausnw on Jan 19, 2018 14:14:01 GMT -9
They make citrus strippers that kinda almost work.
The one thing I do is use aluminum tape and lots of aluminum foil. Recently I bought the BIG roll of aluminum foil at Costco and it was cheaper then paper for taping off an aircraft. Painted two planes and countless touch-ups and still using the same roll of aluminum. I may never use paper again.
|
|
