NDI - Engine Mount Area

[Tim Glubaskas]

We will use this thread for the Engine Mount Eddy Current Inspections

Link to Eddy Inspection information follows:




This inspection was performed with engine removed for normal TBO and is checking the bolt hole at various depths, along with the lower/upper leg and weld area.
Rivet heads were also checked on the side legs.

Inspection from start to finish took less than 30 minutes.

Results of these inspections follow - we will post more results and comments as we continue on with the fleet

[Tim Glubaskas]

Results of this Eddy Current Inspection Follow - we will continue as our Engine Changes occur:

Date: 07/01/13
N59826 S/N 31-7652077 AFTT: 16,705.8
Left-Side - No cracks or other defects noted.

Date: 09/09/2013
N820FS S/N 31-7952185 AFTT: 15,235.1
Left-Side - No cracks or other defects noted.

Date: 10/21/2013
N4434D S/N 31-7552020 AFTT: 18,240.3
Right-Side - No cracks or other defects noted.

Date: 12/11/13
N4434D S/N 31-8152089 AFTT: 30,688.6
Left-Side - No cracks or other defects noted.

Date: 04/19/14
N27663 S/N 31-7852094 AFTT: 20,854.5
Right-Side - No cracks or other defects noted.