|
Post by anatole on Sept 4, 2018 13:01:06 GMT -9
Hi all, when overhead blower switch selected on, no power coming to RHS fan/blower.
Reluctant to remove the RHS lower panel and associated ducting.. we had a bit of a tug on it but not sure how it was attached and may only reveal the wires to be disappearing off somewhere else..
Any ideas on the general location of where these wires would normally be T'd off the LHS blower?
Many thanks!
So glad I found this forum - been searching for a few years!
|
|
|
Post by Tim Glubaskas on Sept 5, 2018 8:40:43 GMT -9
Are you talking about the fan under the spar seat area (just forward of the spar?
Ours normally have 'handsakes' in that area so the fan can quickly be replaced. Do you have voltage at the fan? Is a breaker tripping?
feel free to shoot me an email dm@warbelows.com
|
|
|
Post by anatole on Sept 11, 2018 11:38:44 GMT -9
Yes, the fans understand the spar seats.
No voltage to the fan
Will do, cheers
|
|
|
Post by Tim Glubaskas on Sept 13, 2018 10:34:07 GMT -9
One of our guys contacted you via the telephone - hopefully it helped some.
t
|
|