|
|
Post by roger on Dec 20, 2016 10:39:04 GMT -9
Hey all, a couple months ago one of our guys tapped the nose of the airplane with a tug and the plastic cap on the end of the radome shattered. We put some glass on there but frankly it looks like garbage. Anyone know if that part is obtainable separately? I see the 486-685 (alt p/n SJ8665-FP23 ) boot in the IPC, but that as far as I can tell that is just a clear film that protects the paint.
|
|
judd
New Member
Posts: 7 
|
Post by judd on Jan 3, 2017 10:15:44 GMT -9
We use to be able to purchase these from a guy I believe in Minnesota. I was no longer able to get ahold of him and we switched to the 3M type. The black plastic caps we use to order was simply a part number Cap-9 that came with the cap and RTV needed to install. I sent one of these black caps to a DER in Anchorage to see if they could duplicate them. After a quote of $7500 we decided to go with the 3M type.
|
|
|
|
Post by roger on Jan 5, 2017 11:38:11 GMT -9
We use to be able to purchase these from a guy I believe in Minnesota. I was no longer able to get ahold of him and we switched to the 3M type. The black plastic caps we use to order was simply a part number Cap-9 that came with the cap and RTV needed to install. I sent one of these black caps to a DER in Anchorage to see if they could duplicate them. After a quote of $7500 we decided to go with the 3M type. That's too bad. Where are you getting the 3M ones? Last time I looked I couldn't find those either. |
|
judd
New Member
Posts: 7
|
Post by judd on Jan 9, 2017 8:39:40 GMT -9
I use to get them from Aviall, but I see they're no longer available. Aircraft Spruce has PM Research ones under part number PM-170 for the Cheiftains
|
|
